Skip to content
QiTASC.com / intaQt Setup and Configuration /
intaQt Phone Service (intaqt.conf)
/ .. /
intaQt Phone Service (intaqt.conf)










Remote Phone Services

By configuring the RemotePhoneServices section in an intaQt .conf file, intaQt accesses remote phone(s) by sending a message to the standalone intaQt Phone Service, which passes it to the phone(s).

Configuration requires the IP address of the machine that is running the intaQt Phone Service. It also requires the Socket, which is addressed by the Port number that it is assigned to.

Syntax

1
2
3
RemotePhoneServices {
    <serviceAddress String> : <serviceName String>
}

Parameters

  • serviceAddress - This consists of two components:
  • The IP address of the machine that is running the service, or its Host name
  • This is followed by the Port number of the socket that the service is running on, and must be separated by a colon (:)

  • serviceName - the user-assigned name for the RemotePhoneServices

Example

1
2
3
4
5
RemotePhoneServices = {

    "192.168.1.1:6000" : "VIE"
    "192.168.0.1" : "DUS1"
}
Note: Snom phones can also be used via the intaQt Phone services.